ph level for acid extraction

itz · 03-27-08, 14:45

uhmm, donno if this is the right place, please forgive me if it is not!
Just a quick question:
What is the ideal ph level for the usual M extraction tek? All instructions are rather vague in regards to that.
My friend set up three jars, each with 160 ml distilled water, and added muratic acid:
1cc ph= 0.9
2cc ph= 0.5
0.2 cc ph= 1.7

which one is correct?, thank you!

itz · 03-28-08, 18:29

I know this a total newbie question, or absolutely out of place in this particular forum, but somebody is got to know this simple answer here!?

Caljet666 · 03-29-08, 02:47

Between pH2 and pH4 is good for acid extractions.

marsofold · 03-29-08, 10:30

For DMT extraction a ph of around 3 is ideal (it is not critical). A solution of 0.14grams/gallon yields this ph. Since common muriatic acid is 31.5% HCl, then: 0.14/0.315 = 0.444 grams. Assuming a specific gravity of around 1, then at roughly 20 drops per gram, 20 x 0.444 = 9 drops per gallon.

itz · 03-29-08, 16:33

awesome, thank you so much! I had a feeling my friend was using too much.

Delafonze19 · 03-31-08, 00:26

My freind uses vinegar straight out of the bottle I believe it is 2.2pH

[Home]	[The Vaults]	[Glossary]	[Donate]	[Sponsors]	[Affiliates]
[Calendar]	Mark Forums Read	[VIP Chat]	[Register]	[Activate]	[Resend Email]

03-27-08, 14:45	#1 (permalink)
itz Mycophiliac Join Date: Oct 2007 Posts: 3	ph level for acid extraction uhmm, donno if this is the right place, please forgive me if it is not! Just a quick question: What is the ideal ph level for the usual M extraction tek? All instructions are rather vague in regards to that. My friend set up three jars, each with 160 ml distilled water, and added muratic acid: 1cc ph= 0.9 2cc ph= 0.5 0.2 cc ph= 1.7 which one is correct?, thank you!

03-29-08, 02:47	#3 (permalink)
Caljet666 Dumbass Join Date: Feb 2007 Posts: 246	Between pH2 and pH4 is good for acid extractions. __________________ ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DMT tek compilation (quite unorganized but could be helpful)	AndyLandy420	Holding Tank	6	09-30-08 23:04
Entropymancer's DMT Extraction Overview	Entropymancer	DMT Spice	12	06-17-08 04:10
vortex's method from blackclover.au	lucysmiling	DMT Spice	20	01-06-07 21:51
Lucid and Visual Morning Glory LSA Extracts	tregar	Misc. Entheogens	63	11-13-06 19:31
trying to convert vovin's tek to 1lb extraction?	Bkultra	DMT Spice	12	01-01-06 12:34

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-28-08, 18:29	#2 (permalink)
itz Mycophiliac Join Date: Oct 2007 Posts: 3	I know this a total newbie question, or absolutely out of place in this particular forum, but somebody is got to know this simple answer here!?

03-29-08, 10:30	#4 (permalink)
marsofold Mycotopiate Join Date: Oct 2005 Posts: 345	For DMT extraction a ph of around 3 is ideal (it is not critical). A solution of 0.14grams/gallon yields this ph. Since common muriatic acid is 31.5% HCl, then: 0.14/0.315 = 0.444 grams. Assuming a specific gravity of around 1, then at roughly 20 drops per gram, 20 x 0.444 = 9 drops per gallon.

03-29-08, 16:33	#5 (permalink)
itz Mycophiliac Join Date: Oct 2007 Posts: 3	awesome, thank you so much! I had a feeling my friend was using too much.

03-31-08, 00:26	#6 (permalink)
Delafonze19 Mycophage Join Date: Apr 2007 Posts: 149	My freind uses vinegar straight out of the bottle I believe it is 2.2pH