Unresonably easy DMT tek

cars2024 · 10-13-09, 20:54

not sure where to post this
i know a man who does it like this and gets very high yields

--do not use tap water
--do not use colored lye (use white crystal lye only)
--do not make large batches (over 200g)
--do not sell dmt
--and wear gloves/safety glasses when using lye

--most use a plastic 2 liter bottle because you can squeeze it
to concentrate the naphtha in the neck of the bottle
which makes pulling with a syringe easier
__________________________________________________ _______
__________________________________________________ _______

disolve 125g Lye into 1750ml PURIFIED water
add 100g MHRB and shake it VERY WELL

wait 12 hours

------------------------------------------------------------------

add 120ml Naphtha gently adgitate hourly (or as often as possible) for 12 hours- remove and save Naphtha

add 120ml Naphtha gently adgitate hourly (or as often as possible) for 12 hours- remove and save Naphtha

add 120ml Naphtha gently adgitate hourly (or as often as possible) for 12 hours- remove and save Naphtha

------------------------------------------------------------------

add one teaspoon of sodium carbonate to 4oz purified water and disolve completely to make your water wash solution

add 2oz water wash solution to the 360ml Naphtha and shake
wait 5 minutes remove and save Naphtha

add 2oz water wash solution to the 360ml Naphtha and shake
wait 5 minutes remove and save Naphtha

------------------------------------------------------------------

evaporate Naphtha in a glass dish
(day 1 you'll see an oil on the glass -- day 2-3 the oil will be a complete sheet of dmt crystals)

scrape crystals and enjoy

at this point your candy is quite smokable... VERY VERY Smokable

__________________________________________________ _______
__________________________________________________ _______
__________________________________________________ _______
__________________________________________________ _______

Q- why am i waiting 12 hours so often?
A- gives the chemicals time to absorbe molecules or break down plant matter

Q- why wont my oil crystalize?
A- (1)you screwed up somewhere (2)like a snowflake dmt will not crystalize on itself it needs a seed particle to start the crystalization process try to seed it with some dmt or scratch the glass below the oil

Q- how can i make smaller/larger batches with this method?
A- MHRB times 17.5 = water (M*17.5=W)
MHRB times 1.25 = lye (M*1.25=L)

Q- where do i get the chemicals?
A- Lye (drain cleaner- NaOH) hardware store
Naphtha (paint thinner) hardware store
MHRB (magic powder) pizza hut
Water (H2O- pure) grocery store
Sodium Carbonate (Na2CO3 - Washing Soda)
laundry isle at grocery store

KungFoo C · 10-21-09, 03:14

That's very nice and simple; and I like the layout, it's asthetic. My view is that if someone actually needs it broken down to them that bad, then DMT probably can't even help their consciousness (not to bag on the capabilities of DMT at all). Your tittle did say that though lol. The only thing with this is that it's possible to easily handle twice that bark in under 6 hours to finish.
Then you can be done with the process, which is nice because you don't have to worry (at least in most countries - hypothetically) about getting in trouble with manufacturing a Sched I compound anymore. Something about 2 days processing and 1-3 days evaporating sounds unpleasant to me.
Please don't take this the wrong way, I just don't like the government having more of a reason to dedicate funds to dmt persecution, or the thought of someone getting in trouble over such a useful stigmatized tool.

Thank you for the contribution to the information war!

cars2024 · 10-21-09, 23:10

yeah its by far a low quality process i'll give ya that lol

but the first time it was explained to me (the day i learned DMT existed) this is how it was presented -- so i thought i'd post it because its got about a 0% failure rate - but for anyone who can even mildly understand directions i'd push them away from this process because its out dated - im told that this is the same way this guy was tought to make his spice in the mid 70's only difference is that he used to use a weak lye water wash insted of a sodium carbonate water wash

kcmoxtractor · 10-21-09, 23:44

DMT can also be freeze precipitated from naphtha, by pooling the solvent pulls in a milk jug and putting in your freezer. Colder the better! That way, if you have more than you can extract in one run, then the solvent can be reused on further extractions.

Then each time when you freeze precipitate on later batches of bark, the solvent is already to max solubility for the freezer temperature. That means you freeze precipitate all of the alkaloids that you pulled in the second extraction.

Have fun and be safe!

[Home]	[The Vaults]	[Glossary]	[Sponsors]	[Affiliates]
[Search]	Today's Posts	Mark Forums Read	[Register]	[Activate]	[Resend Email]

10-13-09, 20:54	#1 (permalink)
cars2024 Mycophiliac Join Date: Aug 2009 Posts: 20	Unresonably easy DMT tek not sure where to post this i know a man who does it like this and gets very high yields --do not use tap water --do not use colored lye (use white crystal lye only) --do not make large batches (over 200g) --do not sell dmt --and wear gloves/safety glasses when using lye --most use a plastic 2 liter bottle because you can squeeze it to concentrate the naphtha in the neck of the bottle which makes pulling with a syringe easier __________________________________________________ _______ __________________________________________________ _______ disolve 125g Lye into 1750ml PURIFIED water add 100g MHRB and shake it VERY WELL wait 12 hours ------------------------------------------------------------------ add 120ml Naphtha gently adgitate hourly (or as often as possible) for 12 hours- remove and save Naphtha add 120ml Naphtha gently adgitate hourly (or as often as possible) for 12 hours- remove and save Naphtha add 120ml Naphtha gently adgitate hourly (or as often as possible) for 12 hours- remove and save Naphtha ------------------------------------------------------------------ add one teaspoon of sodium carbonate to 4oz purified water and disolve completely to make your water wash solution add 2oz water wash solution to the 360ml Naphtha and shake wait 5 minutes remove and save Naphtha add 2oz water wash solution to the 360ml Naphtha and shake wait 5 minutes remove and save Naphtha ------------------------------------------------------------------ evaporate Naphtha in a glass dish (day 1 you'll see an oil on the glass -- day 2-3 the oil will be a complete sheet of dmt crystals) scrape crystals and enjoy at this point your candy is quite smokable... VERY VERY Smokable __________________________________________________ _______ __________________________________________________ _______ __________________________________________________ _______ __________________________________________________ _______ Q- why am i waiting 12 hours so often? A- gives the chemicals time to absorbe molecules or break down plant matter Q- why wont my oil crystalize? A- (1)you screwed up somewhere (2)like a snowflake dmt will not crystalize on itself it needs a seed particle to start the crystalization process try to seed it with some dmt or scratch the glass below the oil Q- how can i make smaller/larger batches with this method? A- MHRB times 17.5 = water (M17.5=W) MHRB times 1.25 = lye (M1.25=L) Q- where do i get the chemicals? A- Lye (drain cleaner- NaOH) hardware store Naphtha (paint thinner) hardware store MHRB (magic powder) pizza hut Water (H2O- pure) grocery store Sodium Carbonate (Na2CO3 - Washing Soda) laundry isle at grocery store Last edited by cars2024; 10-13-09 at 21:02. Reason: mistakes and other stuff :)

10-21-09, 23:10	#3 (permalink)
cars2024 Mycophiliac Join Date: Aug 2009 Posts: 20	yeah its by far a low quality process i'll give ya that lol but the first time it was explained to me (the day i learned DMT existed) this is how it was presented -- so i thought i'd post it because its got about a 0% failure rate - but for anyone who can even mildly understand directions i'd push them away from this process because its out dated - im told that this is the same way this guy was tought to make his spice in the mid 70's only difference is that he used to use a weak lye water wash insted of a sodium carbonate water wash __________________ "However long the night, the dawn will break."

10-21-09, 23:44	#4 (permalink)
kcmoxtractor Satan's Helper Join Date: Jun 2008 Posts: 1,349	DMT can also be freeze precipitated from naphtha, by pooling the solvent pulls in a milk jug and putting in your freezer. Colder the better! That way, if you have more than you can extract in one run, then the solvent can be reused on further extractions. Then each time when you freeze precipitate on later batches of bark, the solvent is already to max solubility for the freezer temperature. That means you freeze precipitate all of the alkaloids that you pulled in the second extraction. Have fun and be safe! __________________ "It was the straying that found the path direct" - Austin Osman Spare

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-09, 03:14	#2 (permalink)
KungFoo C Mycophiliac Join Date: Aug 2008 Posts: 93	That's very nice and simple; and I like the layout, it's asthetic. My view is that if someone actually needs it broken down to them that bad, then DMT probably can't even help their consciousness (not to bag on the capabilities of DMT at all). Your tittle did say that though lol. The only thing with this is that it's possible to easily handle twice that bark in under 6 hours to finish. Then you can be done with the process, which is nice because you don't have to worry (at least in most countries - hypothetically) about getting in trouble with manufacturing a Sched I compound anymore. Something about 2 days processing and 1-3 days evaporating sounds unpleasant to me. Please don't take this the wrong way, I just don't like the government having more of a reason to dedicate funds to dmt persecution, or the thought of someone getting in trouble over such a useful stigmatized tool. Thank you for the contribution to the information war!