PE Uncut & Golden Teachers grow log

Mahi · 01-20-09, 02:21

Hey hey! I just wanted to start off with a big thanks to all of you! This truly is an amazing forum, and I really appreciate all the knowledge that is shared.

Well here's what my FOAF is working with..

He decided to start with some LC and go from there.. most likely the LC will be used on WBS. After a few days of collecting all the equipment he was finally ready to begin.

He started by making a glovebox.. using a rubbermaid storage box, two PVC connectors, silicone(clear RTV silicone sealant), and a pair of cleaning gloves.
He cut two circles that where the size of the connectors out of one side, shoved the connectors in, and put a layer of silicone on the inside and outside of storage box.

After letting that dry, he pulled the gloves over the connectors and sealed the two together using some silicone.

He then started making the jars for the LC, using h3's airport/rtv silicone lids.

One jar was filled with 400 ml distilled water, 15 ml karo, and 15 ml honey. The other jar had 400 ml distilled water and 15 ml karo. My FOAF does own a older styled PC(no psi settings/gauges), but decided not to use it this time. Instead both jars where put in the oven at 300 degrees for about 50 min.

After jars cooled down he setup everything in the glovebox. He first injected the airport syringe to release pressure, and then used about 2cc for each jar.

Jars where then transferred to TiT. He's using a tetra aquarium heater that sucks. Temperature is hanging between 74-76 degrees.. with the damn thing running all day. So he's hoping you guys have a reccomended heater.

This is his first attempt.. he's making two more LC jars with some GT spores, but he wants to figure out how to use his PC first. Updates will be posted regularly..

Thanks again guys

Irishlion · 01-20-09, 02:43

Looking good man, Best of luck to you man.

Psilly_Engineer · 01-20-09, 04:16

Nice setup bro...keep up the good work! You get a smiley face!

Mahi · 01-23-09, 23:34

So there where some issues with the TiT, temperatures where really low. There was very little growth going on.. so my buddy bought a different aquarium heater and temps have been a constant 82 degrees since yesterday. I can't believe how fast its been growing since. My buddy made two more LC jars today.. and is excited to see the difference with the steady temperatures.

Here's a picture of the jar who had very little growth yesterday.. and this is after a day with the better temps.

buteo · 01-23-09, 23:42

nice!

Mahi · 01-26-09, 22:57

Hey guys,

Just have a quick question.. there's definitely growth going on, slow, but growing. I remember reading somewhere that shaking the jars to much will cause "retarded" growth? So my FOAF has been swirling it instead.. Can the jars be shook or not?

Also, he's using silicone lids.. the jars are about half full, is that enough air? Or should he stick the airport syringe in every once and a while?

thanks~

Here's the same jar that I posted earlier..

feralronin · 01-26-09, 23:24

Looks really good so far.

Mahi · 01-27-09, 00:32

Thanks

I'm getting pretty excited.. can't even imagine what the fruiting stage is going to be like!!

D3M0NX · 01-27-09, 02:09

how many day you in now?

Mahi · 01-27-09, 09:19

He has two jars that are about a week old, and two more that are around 4 days..

buteo · 01-27-09, 09:41

id let em keep goin...ive had some i thought stalled but i needed to get more air and warmer temps. i put mine in once and a while but ive changed my mind i get faster growth when i leave the airport in and less chance for contams.

Mahi · 01-27-09, 19:11

Hmm, excuse me for probably being stupid, but when you leave the airport syringe in.. won't contams just seep in? or does the polyfill stop it? Thanks for your input by the way, it's much appreciated

dice · 01-27-09, 20:35

Hey lookin good so far.
I myself have a few bags of pe, and gt about ready to fruit.

For the airport
Yes polyfill filters all the contams and just lets them breath. nothing gets in
Id leave it in all time aint nothing to worry about.
Good luck

Mahi · 01-27-09, 22:04

Sweet..

Definitely would love to see some pic's of your PE's and GT's

Mahi · 01-30-09, 22:20

Hello hello..

Not to much going on. Its hard for me to tell if the first jar has been growing any.. I think it has a little. When should my buddy start thinking about making syringes? I'm also posting some pictures of the other LC's that are about 6 days old..

Here's the one that's about 10 days old..

Here are the other two that are about 6 days old..

Mahi · 02-06-09, 11:10

FOAF knocked up 6 wide mouth pint jars (only size available a.t.m.) with LC. The jars are filled with brf, vermiculite, and distilled water. They're now inside the TiT that's hanging around 80/82 degrees..

So not to much going on yet. I just had a quick question for you guys, I've read in quite a few places that the pint sized jars take forever to colonize, I'm actually leaving mid march for a big hiking trip.. I should be disconnected for 3+ months. Do I have any chance of the jars getting fully colonized before then? I'm hoping that the LC sped things up a little..

Fresh Brewed · 02-06-09, 11:38

I think you can get your jars fully colonized by then, and a flush or two. But I don't think you have the time to get everything that you possibly could out of your colonized jars. Not a huge deal since you obviously have a handle on creating your own supply, but something to think about.

On a side note, I think those are some of the best LC pics I have ever seen. Getting good pics of LC's is notoriously hard, and you knocked it out of the park.

Pic of the month nominee...If I remember when the time comes for Feb.

Mahi · 02-06-09, 21:41

Flush or two? sweeeet

And thank you for that complement!! I try

I actually just had a flashlight shine through the bottom of the jar.. and turned of the lights, camara seemed to focus alot easier.

p.s. I was going through some of the topic's you started.. and came across that ("Battle at Kruger" Have you seen this video?)Battle at Kruger video. WOW! That was insane

dice · 02-06-09, 21:57

Hey man yeah the lc looked great.
But im not sure man I know using the lc
is gonna speed stuff up real good.
Your looking at leaving in a month and change.
With 1pint and not half may take up to 3 weeks
maybe even a month, but then you gotta
birth and wait till they do there thing.
So you might be pushing it close.
Although maybe FB said you might get a flush.
If not def make some more lc if you can,
and put it in the fridge also till you get back
In any case sending fast grow vibes your way.
Good Luck.

Dr.Hallucination. · 02-06-09, 22:13

Quote:

Originally Posted by Fresh Brewed

On a side note, I think those are some of the best LC pics I have ever seen. Getting good pics of LC's is notoriously hard, and you knocked it out of the park.

For sure,nice LC and very nice pic's.They look like clouds man,very nice indeed.

Mahi · 02-06-09, 23:42

Quote:

Originally Posted by dice4717

Hey man yeah the lc looked great.
But im not sure man I know using the lc
is gonna speed stuff up real good.
Your looking at leaving in a month and change.
With 1pint and not half may take up to 3 weeks
maybe even a month, but then you gotta
birth and wait till they do there thing.
So you might be pushing it close.
Although maybe FB said you might get a flush.
If not def make some more lc if you can,
and put it in the fridge also till you get back
In any case sending fast grow vibes your way.
Good Luck.

Hey man, how are your PE bags doing?
I'm definitely pushing it close.. but guess what! I just checked my temp's in the TiT because I had set it a little higher earlier, and saw a little bit of growth!! I only checked one jar, don't want to mess around to much while its still growing.. I'll probably check all of them in two days or so.

Quote:

Originally Posted by Dr.Hallucination.

For sure,nice LC and very nice pic's.They look like clouds man,very nice indeed.

Haha clouds, thanks man! Not as good as the photos you took at work

dice · 02-06-09, 23:55

Hey thanks for asking.
My bags are done now,
but im kinda in the same spot as you.
Im going outta town sunday for a week so not as bad,
but gonna let them in the bags till i get back
they been finished and shoulda birthed em all
within the past week. But they should hold out.

Anyways with yours man def dont birth them early
cause your rushed if you would they stand a huge chance
of contaming, cause even if the outside is done
dont mean the inside is.

eatyualive · 02-07-09, 15:57

looking great so far.

yOko · 02-07-09, 18:17

Mahi, Wouuu.....Very similar to the crystal-clear clouds!!! beautiful!!!

bmad · 02-07-09, 18:33

looks awesome man great work.. love the glove box

and dice I will trade you my first born for some PE prints

Mahi · 02-08-09, 01:37

Thanks guys! Stuff is going good, no contaminants so far..

definitely going to wait till last possible moment to birth them, still not completely sure if they will be done.. it doesn't help that there PE's either

I might even do a few invitro and take them on trip with me, haha maybe..

Here's a picture of one of the jars, pretty much all five jars have similair growth near inoculation points..

On a side note, here's one of the four LC jars. This jar was actually the first to be inoculated. This jar was karo + honey, jar didn't look to good after few days.. and showed very little growth. I'm not sure if this is mycelium growing in there. The water is very murky/dusty, Anyways here's a picture of the jar..

spanky · 02-08-09, 10:24

Yeah man, I have a honey LC right now that looks exactly like that- not sure what it is, debating on weather to throw it out or try it.

Mahi · 02-08-09, 19:08

Quote:

Originally Posted by spanky

Yeah man, I have a honey LC right now that looks exactly like that- not sure what it is, debating on weather to throw it out or try it.

Well I just tried shaking up the jar to see if the growth would break up like the mycelium did.. and nope it didn't. I think I might just throw it out.

Aqua Velva · 02-08-09, 19:42

Beautiful LC pics bro!

Nicci · 02-11-09, 09:03

I'm going to replicate your tek to the "T" this weekend. I hope to see the same results.

Mahi · 02-15-09, 10:13

Hellooooo,

Still waiting on jars to colonize.. I'm a little worried about some of the jars, they're showing some moisture on the glass. I think one of the jars actually got cobweb from it..

Here's some pictures

DeadSpore · 02-18-09, 03:10

Good vibes your way!

Mahi · 02-24-09, 13:24

Hey hey! thanks guys.. I think they're almost done.

Here's a few picture's.. I actually have some more time now, so I was thinking about maybe crumbling up a few of the jars and spawning it to something.. any recommendations?

Some of the jars are covered with rhizomorphic growth..

No contams yet!

Fresh Brewed · 02-24-09, 19:46

Killer rhizo's man. I think you're gonna have a ziplock full before you go hiking.

Mahi · 02-24-09, 20:57

Hehe.. I hope so, only have a few weeks left! Hey thanks for nominating that LC picture by the way, I really appreciate that.

Fresh Brewed · 03-01-09, 11:41

How goes it Mahi? It's Mar 1st. Got anything in the FC?

CoyoteMesc · 03-01-09, 17:00

Looks like you've done this a few times to me.

Great pictures, you work the camera well too.

18 days to 90% or so....not too shabby at all.
Everything looks clean and professional.
Another job well done

mushhut · 03-01-09, 19:51

Great pics bro. Any fruits yet? If not you should be very close. Good luck.

Mahi · 03-08-09, 00:54

Thanks guys

definitely would not have made it this far without all the info you guys share.

Well I was really excited about posting today.. I have been waiting on two jars to fully colonize, but they are taking there sweet ass time. While three of the other jars have been done for almos a week now. So I decided to birth them tonight..

Here's the problem.. they don't come out

. I used "ball wide mouth" jars.. but they still will not come out. Soo I'm thinking about trying to smash the jars.. but the damn glass is so thick. I'm scared of smashing the cakes. Anybody been in similair situation? What did you do?

THANKS

feralronin · 03-08-09, 01:03

Sometimes it takes a hard bang on a counter, other times banging it on your gloved hand, and even pulling it out. There have been times when I packed my jars a little too tight and had the same issues. Or you can just spoon it out and spawn.

Mahi · 03-08-09, 01:10

..Yeah I was banging the hell out of it, but then it started to crumble. I'm thinking about spawning it.. but just not sure which tek to follow.

p.s. Mushies smelt sooo good when I opened the jar.

hyphaenation · 03-08-09, 01:28

If your trying to keep the cakes intact a PC'd butter knife (wrapped in tinfoil) works in a pinch. Also leaving the jars a few days after what looks like full colonization will cause them to shrink a wee bit.

Mahi · 03-08-09, 14:11

Well just got done guys.. I ended up smashing the jars, cakes came out great. They felt pretty spungy, definitely not dry.. so I'm only going to dunk them for a few hours. I'll post some pic's tonight when I put them in the FC.. getting really really excited man. I actually saw my first pin in one of the dry vermiculite barriers..

Vague Blur · 03-08-09, 15:18

Quote:

Originally Posted by Mahi

Thanks guys

definitely would not have made it this far without all the info you guys share.

Well I was really excited about posting today.. I have been waiting on two jars to fully colonize, but they are taking there sweet ass time. While three of the other jars have been done for almos a week now. So I decided to birth them tonight..

Here's the problem.. they don't come out

. I used "ball wide mouth" jars.. but they still will not come out. Soo I'm thinking about trying to smash the jars.. but the damn glass is so thick. I'm scared of smashing the cakes. Anybody been in similair situation? What did you do?

THANKS

Yeah, Ive had the same problem with those size jars, although I did let them colonize for a really long time. They were just holding fast to the glass. It required a lot of banging and pulling the cakes out by hand, which I regretted doing cause it probably harmed them somewhat. I stick to the half pints when possible for that reason.

PS Awesome pics! I was able to compare my LCs to yours and see what was supposed to be normal (first time for LCs for me). Great growlog youve got going here.

Quote:

Originally Posted by Mahi

p.s. Mushies smelt sooo good when I opened the jar.

I wish they tasted as good as they smelled!

Mahi · 03-08-09, 22:34

Yes, definitely getting some half-pint for next time.. I don't think I damaged the cakes to much, I saw a little bit of blue on them though. Glad the pictures where usefull, and thanks for the complement.

Alright well cakes are in FC.. I dunked them for about 8? hours. Then I double-end cased them. So stoked at whats to come, still haven't had any trouble with contams, really hope it stays that way

..dunked

Mahi · 03-11-09, 19:41

PINS

thanks again guys

Also made two tubs rez effect style.. only was able to use vermiculite, so we'll see how that go's

Freaky · 03-11-09, 22:30

This is a great thread!

Congrats on the pins! You should get some nice fruits poppin up!

Mahi · 03-12-09, 16:06

Hallo! Need some expertise on cobweb.. I checked on my two tubs today, and they look pretty good. I know I'm probably being paranoid, but the growth looked pretty wispy.. I tried getting as close as I could to take some pictures. I was just hoping somebody could let me know if it looks "normal". The tubs have been in a TiT at around 80 degrees..

Here's some pictures..

More pins are appearing on the cakes

hyphaenation · 03-12-09, 16:11

If it was pans it would look normal , but for cubies ... not so much.

Looks like your humidity might be quite high or the surface of your cakes to moist. You can try giving a fine mist of diluted hydrogen peroxide on the cobweb. Also make sure you have lots and lots of FAE holes (tyveked or polyfiled). Maybe try in the future misting on the walls of the fruiter rather than right on the cakes , if your not already. You could also fan a lot after treating the cakes with peroxide.

A search for cobweb will reveal many threads about the subject.

Good luck.

Mahi · 03-14-09, 13:31

Thanks for that hyphaenation.. I looked up alot of cobweb threads, but its ofton described being "grayish" and also coming of the substrate a few inches, so I really wasn't sure if it actually was.

Anyways cakes are going good, just posting some pictures to follow the growth. Pins are showing up everywhere..

[Home]	[The Vaults]	[Glossary]	[Sponsors]	[Affiliates]
[Search]	Today's Posts	Mark Forums Read	[Register]	[Activate]	[Resend Email]

01-20-09, 02:21	#1 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	PE Uncut & Golden Teachers grow log Hey hey! I just wanted to start off with a big thanks to all of you! This truly is an amazing forum, and I really appreciate all the knowledge that is shared. Well here's what my FOAF is working with.. He decided to start with some LC and go from there.. most likely the LC will be used on WBS. After a few days of collecting all the equipment he was finally ready to begin. He started by making a glovebox.. using a rubbermaid storage box, two PVC connectors, silicone(clear RTV silicone sealant), and a pair of cleaning gloves. He cut two circles that where the size of the connectors out of one side, shoved the connectors in, and put a layer of silicone on the inside and outside of storage box. After letting that dry, he pulled the gloves over the connectors and sealed the two together using some silicone. He then started making the jars for the LC, using h3's airport/rtv silicone lids. One jar was filled with 400 ml distilled water, 15 ml karo, and 15 ml honey. The other jar had 400 ml distilled water and 15 ml karo. My FOAF does own a older styled PC(no psi settings/gauges), but decided not to use it this time. Instead both jars where put in the oven at 300 degrees for about 50 min. After jars cooled down he setup everything in the glovebox. He first injected the airport syringe to release pressure, and then used about 2cc for each jar. Jars where then transferred to TiT. He's using a tetra aquarium heater that sucks. Temperature is hanging between 74-76 degrees.. with the damn thing running all day. So he's hoping you guys have a reccomended heater. This is his first attempt.. he's making two more LC jars with some GT spores, but he wants to figure out how to use his PC first. Updates will be posted regularly.. Thanks again guys Attached Thumbnails

01-20-09, 02:43	#2 (permalink)
Irishlion KEY MASTER Join Date: May 2008 Posts: 3,343	Looking good man, Best of luck to you man. __________________ a man without honor isn't a man at all but, a soul trapped in a flesh body that is lost in a void of its own making

01-20-09, 04:16	#3 (permalink)
Psilly_Engineer One of the Best Join Date: Jun 2008 Posts: 85	Nice setup bro...keep up the good work! You get a smiley face! __________________ I am... a mushroom; On whom the dew of heaven drops now and then. ~ John Ford

01-23-09, 23:34	#4 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	So there where some issues with the TiT, temperatures where really low. There was very little growth going on.. so my buddy bought a different aquarium heater and temps have been a constant 82 degrees since yesterday. I can't believe how fast its been growing since. My buddy made two more LC jars today.. and is excited to see the difference with the steady temperatures. Here's a picture of the jar who had very little growth yesterday.. and this is after a day with the better temps. Attached Thumbnails

01-23-09, 23:42	#5 (permalink)
buteo Imbicilzzzz Join Date: Oct 2008 Posts: 1,355	nice! __________________ Im only what i think i am

01-26-09, 22:57	#6 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Hey guys, Just have a quick question.. there's definitely growth going on, slow, but growing. I remember reading somewhere that shaking the jars to much will cause "retarded" growth? So my FOAF has been swirling it instead.. Can the jars be shook or not? Also, he's using silicone lids.. the jars are about half full, is that enough air? Or should he stick the airport syringe in every once and a while? thanks~ Here's the same jar that I posted earlier.. Attached Thumbnails

01-26-09, 23:24	#7 (permalink)
feralronin Professional Amateur Join Date: Nov 2007 Posts: 1,325	Looks really good so far.

01-27-09, 00:32	#8 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Thanks I'm getting pretty excited.. can't even imagine what the fruiting stage is going to be like!!

01-27-09, 02:09	#9 (permalink)
D3M0NX Former Member Join Date: Jan 2009 Posts: 231	how many day you in now?

01-27-09, 09:19	#10 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	He has two jars that are about a week old, and two more that are around 4 days..

01-27-09, 09:41	#11 (permalink)
buteo Imbicilzzzz Join Date: Oct 2008 Posts: 1,355	id let em keep goin...ive had some i thought stalled but i needed to get more air and warmer temps. i put mine in once and a while but ive changed my mind i get faster growth when i leave the airport in and less chance for contams. __________________ Im only what i think i am

01-27-09, 19:11	#12 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Hmm, excuse me for probably being stupid, but when you leave the airport syringe in.. won't contams just seep in? or does the polyfill stop it? Thanks for your input by the way, it's much appreciated

01-27-09, 20:35	#13 (permalink)
dice Jack of all trades. Join Date: Aug 2007 Posts: 1,762	Hey lookin good so far. I myself have a few bags of pe, and gt about ready to fruit. For the airport Yes polyfill filters all the contams and just lets them breath. nothing gets in Id leave it in all time aint nothing to worry about. Good luck __________________ When in doubt Pack another

01-27-09, 22:04	#14 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Sweet.. Definitely would love to see some pic's of your PE's and GT's

02-07-09, 15:57	#23 (permalink)
eatyualive ExoCannibalist Join Date: Jan 2006 Posts: 5,064	looking great so far. __________________ Click for Eat's Reference

01-30-09, 22:20	#15 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Hello hello.. Not to much going on. Its hard for me to tell if the first jar has been growing any.. I think it has a little. When should my buddy start thinking about making syringes? I'm also posting some pictures of the other LC's that are about 6 days old.. Here's the one that's about 10 days old.. Here are the other two that are about 6 days old.. Attached Thumbnails

02-06-09, 11:10	#16 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	FOAF knocked up 6 wide mouth pint jars (only size available a.t.m.) with LC. The jars are filled with brf, vermiculite, and distilled water. They're now inside the TiT that's hanging around 80/82 degrees.. So not to much going on yet. I just had a quick question for you guys, I've read in quite a few places that the pint sized jars take forever to colonize, I'm actually leaving mid march for a big hiking trip.. I should be disconnected for 3+ months. Do I have any chance of the jars getting fully colonized before then? I'm hoping that the LC sped things up a little..

02-06-09, 11:38	#17 (permalink)
Fresh Brewed Mycotopiate Join Date: Aug 2006 Posts: 1,047	I think you can get your jars fully colonized by then, and a flush or two. But I don't think you have the time to get everything that you possibly could out of your colonized jars. Not a huge deal since you obviously have a handle on creating your own supply, but something to think about. On a side note, I think those are some of the best LC pics I have ever seen. Getting good pics of LC's is notoriously hard, and you knocked it out of the park. Pic of the month nominee...If I remember when the time comes for Feb.

02-06-09, 21:41	#18 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Flush or two? sweeeet And thank you for that complement!! I try I actually just had a flashlight shine through the bottom of the jar.. and turned of the lights, camara seemed to focus alot easier. p.s. I was going through some of the topic's you started.. and came across that ("Battle at Kruger" Have you seen this video?)Battle at Kruger video. WOW! That was insane

02-06-09, 21:57	#19 (permalink)
dice Jack of all trades. Join Date: Aug 2007 Posts: 1,762	Hey man yeah the lc looked great. But im not sure man I know using the lc is gonna speed stuff up real good. Your looking at leaving in a month and change. With 1pint and not half may take up to 3 weeks maybe even a month, but then you gotta birth and wait till they do there thing. So you might be pushing it close. Although maybe FB said you might get a flush. If not def make some more lc if you can, and put it in the fridge also till you get back In any case sending fast grow vibes your way. Good Luck. __________________ When in doubt Pack another

02-06-09, 23:55	#22 (permalink)
dice Jack of all trades. Join Date: Aug 2007 Posts: 1,762	Hey thanks for asking. My bags are done now, but im kinda in the same spot as you. Im going outta town sunday for a week so not as bad, but gonna let them in the bags till i get back they been finished and shoulda birthed em all within the past week. But they should hold out. Anyways with yours man def dont birth them early cause your rushed if you would they stand a huge chance of contaming, cause even if the outside is done dont mean the inside is. __________________ When in doubt Pack another

02-07-09, 18:17	#24 (permalink)
yOko ~ॐ~Ommm~ॐ~ Join Date: Feb 2009 Posts: 16	Mahi, Wouuu.....Very similar to the crystal-clear clouds!!! beautiful!!!

02-07-09, 18:33	#25 (permalink)
bmad Mycophiliac Join Date: Mar 2008 Posts: 346	looks awesome man great work.. love the glove box and dice I will trade you my first born for some PE prints __________________ emotionally crippled narcissist

02-08-09, 01:37	#26 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Thanks guys! Stuff is going good, no contaminants so far.. definitely going to wait till last possible moment to birth them, still not completely sure if they will be done.. it doesn't help that there PE's either I might even do a few invitro and take them on trip with me, haha maybe.. Here's a picture of one of the jars, pretty much all five jars have similair growth near inoculation points.. On a side note, here's one of the four LC jars. This jar was actually the first to be inoculated. This jar was karo + honey, jar didn't look to good after few days.. and showed very little growth. I'm not sure if this is mycelium growing in there. The water is very murky/dusty, Anyways here's a picture of the jar.. Attached Thumbnails

02-08-09, 10:24	#27 (permalink)
spanky Mycophiliac Join Date: Nov 2008 Posts: 66	Yeah man, I have a honey LC right now that looks exactly like that- not sure what it is, debating on weather to throw it out or try it.

02-08-09, 19:42	#29 (permalink)
Aqua Velva One Day At a Time Join Date: Jan 2008 Posts: 137	Beautiful LC pics bro! __________________ - AV

02-11-09, 09:03	#30 (permalink)
Nicci Cheshire Cat Join Date: Feb 2009 Posts: 69	I'm going to replicate your tek to the "T" this weekend. I hope to see the same results. __________________ Know your substance, Know your source, Know your limit.

02-15-09, 10:13	#31 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Hellooooo, Still waiting on jars to colonize.. I'm a little worried about some of the jars, they're showing some moisture on the glass. I think one of the jars actually got cobweb from it.. Here's some pictures Attached Thumbnails

02-18-09, 03:10	#32 (permalink)
DeadSpore Comatose Join Date: Feb 2008 Posts: 92	Good vibes your way! __________________ Shall we go, you and I while we can Through the transitive nightfall of diamonds?

02-24-09, 13:24	#33 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Hey hey! thanks guys.. I think they're almost done. Here's a few picture's.. I actually have some more time now, so I was thinking about maybe crumbling up a few of the jars and spawning it to something.. any recommendations? Some of the jars are covered with rhizomorphic growth.. No contams yet! Attached Thumbnails

02-24-09, 19:46	#34 (permalink)
Fresh Brewed Mycotopiate Join Date: Aug 2006 Posts: 1,047	Killer rhizo's man. I think you're gonna have a ziplock full before you go hiking. __________________ Life is a collection of routines and habits some more interesting than others.

02-24-09, 20:57	#35 (permalink)
Mahi Barefoot Join Date: Jan 2009 Posts: 92	Hehe.. I hope so, only have a few weeks left! Hey thanks for nominating that LC picture by the way, I really appreciate that.

03-01-09, 11:41	#36 (permalink)
Fresh Brewed Mycotopiate Join Date: Aug 2006 Posts: 1,047	How goes it Mahi? It's Mar 1st. Got anything in the FC? __________________ Life is a collection of routines and habits some more interesting than others.

03-01-09, 17:00	#37 (permalink)
CoyoteMesc howling mad Join Date: Jan 2007 Posts: 4,045	Looks like you've done this a few times to me. Great pictures, you work the camera well too. 18 days to 90% or so....not too shabby at all. Everything looks clean and professional. Another job well done __________________ WOODY: Hey, Mr. Peterson, there's a cold one waiting for you. NORM: I know. If she calls, I'm not here.[ (Cheers)

03-01-09, 19:51	#38 (permalink)
mushhut Mycotopiate Join Date: May 2008 Posts: 875	Great pics bro. Any fruits yet? If not you should be very close. Good luck.